AP mast (2K)


by Arthur Dungate


Direct Disc Recording

The term "direct disc recording" came about when equipment was produced to record on a lacquer-coated disc, since playback was then possible directly after recording.

Here the mixing console was in a room behind the auditorium, viewing the screen through a large double-glazed window, rather like a radio studio, while the commentator sat in front of the microphone at a table in the auditorium, with the editor cueing him by his side.

Dubbing Theatre (8K)

Thus the mixer in the room behind, heard the sound under conditions more of a domestic nature.

On one occasion when someone from the film industry saw a BBC dubbing theatre he rather unkindly remarked that the mixer was in the back room since "they couldn't stand the sound of the noise they made"....

Dubbing Theatre - Grams (8K)

Next to the mixing console were banks of 78rpm disc players from which the person on "Grams" would play-in the many fx and music discs as required. The original dubbing theatre at AP had four turntables, but at Lime Grove and Riverside there were six.

In television, film was run at 25fps (frames per second) in contrast to the cinema standard of 24fps. Films on 35mm were recorded in reels of up to 1,000ft which, at 25fps lasted up to 10mins.There was a footage counter visible under the screen which indicated feet of film, the beginning of the reel starting, naturally, at 000ft.

If we had no cue sheet, the person on Grams would watch the film on rehearsal and note down the footage at which various sounds should occur. If, for example, a car door was shut at footage 268, this was noted on the cue sheet.

The appropriate fx disc of a car door shutting would be taken from the library of discs next to Grams, and cued up using headphones ("cans"). The precise point of the sound would be heard in the cans and the disc moved in reverse by exactly one revolution and stopped there with the pick-up on the disc. On a further rehearsal or a "take" when the number 267 came, the disc would be spun sharply and thus at 268 the car door fx would happen, in sync with the picture!

With other things happening together, for example background atmosphere, footsteps, traffic etc would be playing from other discs, it could get quite involved and the grams operator could have piles of discs ready above each turntable.

With regard to music, if the editor had not laid any music tracks, music, too, would have to come from discs. The start of music, say, for the opening titles, was easy enough to do, as in the car door example. But for end titles where the music and titles have to end together, one had to "back-time" the music, noting how long it lasted from a particular part of the music to its end, in seconds, then converting this to film footage. Subtracting this number from the end footage of the film and then cueing the disc at that footage number made the music end at the right place.

In the 1950s television films were dubbed this way and a high degree of skill on the part of both the mixer and Grams operator produced professional results in a minimum of time.

a BBC van, 1950s era (8K)

In the 1950s 35mm mobile soundfilm recording equipment was bulky and heavy and needed to be installed in a large van. The BBC had two such mobile recording units, one for 35mm optical and the other for 35mm magnetic recording.